Plump Turkey Gnome Crochet Shelf Sitter Free Thanksgiving Pattern
Reader Favorites
Lace Panel Crochet Christmas Bauble Cover Free Christmas Pattern
Transform plain glass or acrylic ornaments into heirloom-quality holiday decor with this delicate crochet lace bauble cover pattern. Worked top-down in an open diamond lattice mesh, each cover drapes effortlessly over a standard sphere and finishes with a dainty picot scalloped trim. Threaded with a rich deep red satin ribbon for hanging, a matching trio creates a timeless, cozy aesthetic on your Christmas tree in just one evening.
Lace Panel Crochet Christmas Bauble Cover Free Christmas Pattern
Quick Facts
- Skill level: Easy / Advanced Beginner
- Finished size: Fits standard 3 in (7.5 cm) diameter round baubles
- Yarn: Size 10 Mercerized Crochet Cotton Thread in Cream
- Hook: 1.75 mm (US Steel Hook Size 6)
- Stitches used: chain (ch), single crochet (sc), slip stitch (sl st), picot
- Time to make: 20–25 minutes per cover
Custom size tips and adjustment calculations are included further down in this guide.
What Makes This Bauble Cover Special
This design relies on dynamic chain-mesh geometry that stretches snugly around a glass sphere without requiring complex shaping. The top neck ring fits perfectly under the metal ornament cap, while the expanded chain lattice creates classic diamond windows that let light refract through the glass inside. Finishing the lower edge with a structured picot scallop provides just enough weight to keep the net perfectly centered for elegant crochet christmas decor.
Skill Level
This project is suitable for an adventurous beginner or intermediate crocheter comfortable working with fine thread and small steel hooks.
– Working in joined rounds
– Maintaining consistent chain-space tension
– Working directly into chain spaces
– Working a picot stitch
If you are new to crochet lace ornament projects, working over a solid ball keeps tension consistent and makes stitch placement easy to see!
Finished Measurements
| Measurement | Inches | Centimeters |
|---|---|---|
| Top Neck Opening Diameter | 0.8 in | 2.0 cm |
| Lace Cover Depth (unstretched) | 3.25 in | 8.2 cm |
| Fits Bauble Diameter | 3.0 in | 7.5 cm |
| Fits Bauble Circumference | 9.5 in | 24.0 cm |
Materials You Will Need
| Material / Item | Color / Details | Quantity Required |
|---|---|---|
| Crochet Thread | Cream (Size 10 Mercerized Cotton) | Approx. 40 yds / 37 m (for 3 covers) |
| Hanging Ribbon | Deep Red (1/4 in / 6 mm wide satin ribbon) | 24 in / 60 cm total (8 in / 20 cm per bauble) |
| Glass/Plastic Baubles | Clear glass or acrylic spheres (3 in / 7.5 cm diameter) | 3 baubles |
| Crochet Hook | 1.75 mm (US Steel Size 6) | 1 hook |
| Notions | Steel yarn needle, sharp embroidery scissors | 1 set |
Yarn Suggestions
| Brand / Yarn Line | Fiber Content | Skein Details | Notes |
|---|---|---|---|
| Aunt Lydia’s Classic Crochet Thread Size 10 | 100% Mercerized Cotton | 350 yds (320 m) / 50g | Smooth sheen, structural stitch definition; exact yarn used in sample. |
| DMC Cebelia Crochet Cotton Size 10 | 100% Combed Mercerized Cotton | 284 yds (260 m) / 50g | Double mercerized, extremely durable, crisp lattice shape. |
| Rainbow Cotton 8/4 by Hobbii | 100% Soft Cotton (Super Fine #1) | 186 yds (170 m) / 50g | Soft matte finish; use a 2.0 mm hook for a slightly larger mesh texture. |
⚠️ Note: Avoid using fuzzy yarns, acrylic threads, or unmercerized cotton for this bauble cover pattern. They lack the structural tension needed to form clean lattice openings and will snag when pulling the cover over glass spheres.
Gauge
- Round 1 to Round 3 = 1.5 in (3.8 cm) diameter laid flat.
- Mesh tension: 6 ch-5 sps x 4 rnds = 2 in x 2 in (5 cm x 5 cm) in lattice pattern.
Abbreviations
| Abbreviation | Full Term (US Crochet Notation) |
|---|---|
| ch | chain |
| ch-sp | chain space |
| dc | double crochet |
| ea | each |
| picot | picot stitch (ch 3, sl st in 3rd ch from hook) |
| rep | repeat |
| rnd(s) | round(s) |
| sc | single crochet |
| sk | skip |
| sl st | slip stitch |
| st(s) | stitch(es) |
UK Conversion Note: UK sc = US sc; UK htr = US hdc; UK tr = US dc.
Special Stitches Explained
Picot Stitch (3-Chain Picot)
- Complete the preceding single crochet stitch as instructed.
- Chain 3.
- Insert your hook from top to bottom through the front loop and side bar of the single crochet stitch just made.
- Yarn over and pull through all loops on hook to complete the slip stitch.
Pattern Instructions
Pattern Notes
- The bauble cover is worked top-down in joined rounds.
- Do not turn your work at the end of rounds.
- Slip stitches used to travel to the center of chain spaces at the start of a round count as positioning stitches only.
- Slide the crochet lace cover onto your glass ornament before completing Round 7 or 8 for a perfectly snug fit.
Section 1: Lace Bauble Cover (Cream yarn, make 3)
Foundation: Ch 24. Taking care not to twist the chain, sl st in the first ch to form a ring. (24 ch)
Rnd 1: Ch 1 (does not count as a st here and throughout), work 24 sc into the ring; sl st to first sc to join. (24 sc)
💡 Designer Tip: Make sure your foundation ring fits comfortably over the neck/cap of your glass ornament. It should sit just under the metal cap lip.
Rnd 2: Ch 1, *sc in first st, ch 4, sk 1 st; rep from * 11 more times; sl st to first sc to join. *(12 sc, 12 ch-4 sps)*
Rnd 3: Sl st into first 2 chs of initial ch-4 sp, ch 1, *sc in ch-4 sp, ch 5; rep from * 11 more times; sl st to first sc to join. *(12 sc, 12 ch-5 sps)*
✅ Checkpoint: Measure your mesh at the end of Round 3. The open ring should lay flat at approximately 1.5 inches (3.8 cm) in diameter.
Rnds 4 to 6: Sl st into first 3 chs of initial ch-5 sp, ch 1, *sc in ch-5 sp, ch 5; rep from * 11 more times; sl st to first sc to join. *(12 sc, 12 ch-5 sps)*
💡 Fitting Step: Slip the glass bauble inside the lace cover now, passing the ornament cap through the Rnd 1 neck opening. Work the final two rounds directly around the glass ball.
Rnd 7: Sl st into first 3 chs of initial ch-5 sp, ch 1, *sc in ch-5 sp, ch 4; rep from * 11 more times; sl st to first sc to join. *(12 sc, 12 ch-4 sps)*
Rnd 8 (Edging): Sl st into first ch-4 sp, ch 1, *(2 sc, picot, 2 sc) in ch-4 sp; rep from * in ea ch-4 sp around; sl st to first sc to join. Fasten off Cream yarn, leaving a 4 in (10 cm) tail for weaving. *(48 sc, 12 picots)*
Assembly
- If you did not insert the bauble before Round 7, gently stretch Rnd 1 over the metal hanging cap of the glass sphere so the top opening sits beneath the cap lip.
- Smooth the open diamond lattice mesh down around the sides of the sphere until Rnd 8 flares evenly around the bottom curve.
Finishing
- Thread the Cream yarn tail onto a steel tapestry needle and weave it securely through the wrong side of Round 8 stitches; trim excess.
- Cut an 8 in (20 cm) length of Deep Red satin ribbon.
- Thread the Deep Red ribbon through the wire loop on top of the ornament cap and tie the ends into a secure loop or knot.
- Repeat for all three ornament covers.
Size Customization Tips
If your glass baubles are larger or smaller than 3 inches (7.5 cm), adjust the pattern counts using these calculations derived from our standard gauge:
- For Larger Baubles (3.5 to 4 in / 9–10 cm diameter):
- Foundation Ring: Increase starting ring to Ch 28 and work 28 sc in Rnd 1.
- Mesh Repeats: In Rnd 2, work 14 repeats of (sc, ch 4, sk 1) to create 14 mesh openings.
-
Height: Add 1 additional straight round of (sc in ch-5 sp, ch 5) at Rnd 6. Each added round adds approximately 0.5 in (1.3 cm) of vertical coverage.
-
For Smaller Baubles (2 to 2.5 in / 5–6 cm diameter):
- Use ch-4 spaces instead of ch-5 spaces for Rnds 3 through 6. This reduces circumference by approximately 0.8 in (2.0 cm).
Care Instructions
- Spot clean with a damp cloth and mild soap if needed.
- If removing covers for washing, hand-wash in cold water with delicate soap, press flat between dry towels, and reshape over the ornament while damp to air-dry.
- Store ornaments wrapped individually in tissue paper to protect glass and lace shapes.
FAQ
Can I make these covers with light fingering weight yarn?
Yes! If using Fine #1 or Light Fingering yarn, use a 2.0 mm to 2.25 mm hook. Keep in mind that thicker yarn will yield a slightly larger cover, ideal for 3.5-inch ornaments.
How do I prevent the lace from sliding on smooth glass?
The decreases in Rnd 7 hold the cover tightly underneath the sphere. If your cover feels loose, work Rnd 7 with ch-3 spaces instead of ch-4 spaces to tighten the bottom fit.
Can I use plastic baubles instead of glass?
Absolutely. Shatterproof acrylic or clear plastic baubles are an excellent substitute, especially for households with children or pets! This free crochet pattern works beautifully on both materials.
Happy Crocheting!
You now have a charming set of christmas ornament crochet covers ready to trim your tree or wrap as heartfelt gifts! Save this pin on Pinterest and share your finished christmas decor photos in your favorite yarn community!
📄 Your free PDF pattern