Plump Turkey Gnome Crochet Shelf Sitter Free Thanksgiving Pattern
Reader Favorites
Beaded Crochet Phone Charm Strap Free Crochet Pattern
Add a touch of handmade charm to your tech with this sweet, tactile phone strap. Featuring soft pastel crochet beads, smooth natural wooden beads, and a tiny plush heart charm hanging from a sturdy woven wrist loop, this quick project turns everyday essentials into something special. It is fast to make, budget-friendly, and makes a beautiful handmade gift for friends or family.
Beaded Crochet Phone Charm Strap Free Crochet Pattern
Quick Facts
- Skill level: Easy / Advanced Beginner
- Finished size: Total length approx. 8.5 in (21.5 cm) including loop
- Yarn: Sport weight cotton yarn (or Size 10 crochet thread) in Soft Pink and Sage Green
- Hook: 2.0 mm (US Steel Hook Size 4)
- Stitches used: Magic Ring, Chain, Single Crochet, Slip Stitch, Single Crochet Increase, Single Crochet Decrease
- Time to make: 30–45 minutes
Size customization tips are included further down in this article.
What Makes This Phone Charm Strap Special
- Textural Contrast: The design pairs smooth, warm natural wooden beads with squishy textured crochet beads for a delightful tactile feel.
- Dimensional Puffy Heart Motif: The heart charm is worked in 3D amigurumi style, giving it a plump, rounded shape that holds its form beautifully without flattening.
- Durable Construction: Built with a reinforced chain-and-slip-stitch cord, this strap is designed to withstand daily handling while attaching securely to any phone case.
- Scrap-Friendly: Requires less than 15 yards of yarn total, making it the ideal stash-busting project for your leftover pastel cotton scraps.
Skill Level
This project is rated Easy / Advanced Beginner.
- Working small rounds in continuous spirals (amigurumi style)
- basic increases and decreases
- Joining two small pieces (the heart lobes) together
- Stringing beads onto yarn or thread
If you can make a magic ring and basic single crochet stitches, you can comfortably finish this charm strap in an evening!
Finished Measurements
| Measurement | Inches | Centimeters |
|---|---|---|
| Total Strap Length (including top loop) | 8.5 in | 21.5 cm |
| Wrist Loop Length | 5.5 in | 14.0 cm |
| Heart Charm Width | 1.25 in | 3.2 cm |
| Heart Charm Height | 1.1 in | 2.8 cm |
| Crochet Bead Diameter | 0.6 in | 1.5 cm |
Materials You Will Need
| Color / Item | Yarn Weight / Specification | Quantity |
|---|---|---|
| Soft Pink | Sport Weight (#2 Fine Cotton Yarn) | 10 yds / 9 m |
| Sage Green | Sport Weight (#2 Fine Cotton Yarn) | 5 yds / 5 m |
| Natural Wood Beads | 12 mm Round Unfinished Wooden Beads (with 3–4 mm hole) | 4 beads |
| Crochet Hook | 2.0 mm (US Steel Size 4 / Metric B-1) | 1 hook |
| Nylon Cord / Thread | Thin pink thin attachment cord or heavy-duty thread (for phone loop) | 6 in / 15 cm |
| Fiberfill Stuffing | Polyester fiberfill for heart and crochet beads | Small pinch |
| Tapestry Needle | Blunt end yarn needle | 1 needle |
| Bead Threader / Wire | Collapsible eye needle or thin wire for stringing beads | 1 piece |
Yarn Suggestions
| Yarn Name | Fiber Content | Skein Yardage | Notes |
|---|---|---|---|
| Scharchenmayr Catania | 100% Combed Mercerized Cotton | 137 yds (125 m) / 50 g | Crisp stitch definition, huge pastel shade range. |
| Rico Baby Cotton Soft | 50% Cotton, 50% Acrylic | 137 yds (125 m) / 50 g | Soft texture, ideal for small accessories. |
| Paintbox Yarns Cotton Sport | 100% Cotton | 137 yds (125 m) / 50 g | Budget-friendly option with matte finish. |
⚠️ Note: Avoid using fuzzy acrylics or soft single-ply yarns for phone straps. Phone charms undergo constant friction, so smooth, tightly spun mercerized cotton yarn is required to prevent pilling and stretching.
Gauge
- Stitch Gauge: 8 sc = 1 in (2.5 cm) using a 2.0 mm hook.
- Circle Test: Rounds 1–3 of the Heart Lobe measure approx. 0.5 in (1.3 cm) across.
Exact gauge is not critical for this charm, but keep your stitches tight so stuffing does not peek through the crochet beads or heart.
Abbreviations
| Abbreviation | Full Term (US Crochet Standards) |
|---|---|
| ch | Chain |
| st(s) | Stitch(es) |
| sl st | Slip Stitch |
| sc | Single Crochet |
| inc | Single Crochet Increase (2 sc in same st) |
| dec | Single Crochet Decrease (sc2tog) |
| MR | Magic Ring |
| Rnd(s) | Round(s) |
| BLO | Back Loop Only |
UK Conversion: sc = double crochet (dc), sl st = single crochet (sc).
Special Stitches Explained
- Magic Ring (MR): Wrap yarn around your fingers to form a loop. Insert hook into loop, yarn over, pull up a loop, ch 1, then work the specified number of single crochet stitches into the ring. Pull tail tight to close the center hole.
- Invisible Decrease (dec): Insert hook into the front loop only of the first stitch, then immediately insert hook into the front loop only of the next stitch. Yarn over, pull through both front loops, yarn over and pull through remaining two loops on hook.
Pattern Instructions
Pattern Notes
- All 3D pieces (heart and crochet beads) are worked in continuous spirals without joining rounds unless specified. Use a stitch marker to keep track of the first stitch of each round.
- Keep tension firm throughout to ensure structural stability.
Section 1: Puffy Heart Charm (Soft Pink yarn, make 1)
The heart is created by making two separate top lobes, joining them together, and working downward to a point.
Lobe 1:
- Rnd 1: 6 sc in MR (6 sc)
- Rnd 2: (1 sc, inc) x 3 (9 sc)
- Rnd 3: sc in each st around (9 sc)
Fasten off Lobe 1, leaving a short 4 in (10 cm) tail for closing any small gap between lobes later.
Lobe 2:
- Rnd 1: 6 sc in MR (6 sc)
- Rnd 2: (1 sc, inc) x 3 (9 sc)
- Rnd 3: sc in each st around (9 sc)
Do NOT fasten off Lobe 2. Continue directly to Rnd 4 to join both lobes.
Heart Body:
- Rnd 4: Sc into the first stitch of Lobe 1, sc in remaining 8 sts of Lobe 1. Sc into each of the 9 sts of Lobe 2 (18 sc)
- Rnd 5: sc in each st around (18 sc)
✅ Checkpoint: Use the tail from Lobe 1 to sew shut any tiny gap between the two lobes on the inside before continuing down the body.
- Rnd 6: (1 sc, dec) x 6 (12 sc)
Stuff the heart lightly with fiberfill stuffing. Do not overstuff. - Rnd 7: (dec) x 6 (6 sc)
Fasten off, leaving an 8 in (20 cm) yarn tail. Thread needle through the front loops of the remaining 6 sts and pull tight to close the point. Weave the tail up through the center of the heart and out between the two top lobes—this will be used for attachment.
Section 2: Crochet Beads (Make 2 total: 1 Soft Pink, 1 Sage Green)
These textured beads cover small stuffing or can be worked directly around a 12mm wooden core.
- Rnd 1: 6 sc in MR (6 sc)
- Rnd 2: (inc) x 6 (12 sc)
- Rnds 3–4: sc in each st around (12 sc)
Insert a small pinch of stuffing (or place a 12mm wooden bead inside the crochet shell). - Rnd 5: (dec) x 6 (6 sc)
Fasten off, leaving a 6 in (15 cm) tail. Thread tail through front loops of remaining 6 sts, pull tight to seal the ball, and weave in ends.
Section 3: Wrist Strap Cord (Soft Pink yarn, make 1)
- Foundation: Ch 65.
- Row 1: Sl st in 2nd ch from hook and in each ch across (64 sl st)
Fasten off, leaving a 10 in (25 cm) tail for assembly.
Assembly
- Top Attachment Loop: Fold the thin 6 in (15 cm) nylon attachment cord in half. Knot the raw ends together to form a 2.5 in (6.5 cm) loop.
- Stringing the Beads & Charms:
- Take the main Soft Pink strap cord tail and thread it through your yarn needle.
- Pass the needle through the components in the following sequence from top (phone connection) to bottom:
- Top Attachment Loop knot
- Natural Wooden Bead #1
- Sage Green Crochet Bead
- Natural Wooden Bead #2
- Soft Pink Crochet Bead
- Natural Wooden Bead #3
- Main Wrist Strap Cord base
- Natural Wooden Bead #4
- Soft Pink Heart Charm (top center between lobes)
- Securing: Pass the yarn tail through the top of the Heart Charm, tie firmly to the heart’s top attachment loop with double knots, and hide the knot inside the heart body using your needle.
- Secure all remaining cord ends into the wooden beads with strong knots, trimming excess ends neatly.
Finishing
- Blocking: Lightly steam-block the crochet cord and heart using a garment steamer (do not touch the hot iron plate directly to the yarn).
- Inspection: Tug gently on each segment of the charm strap to confirm all knots are locked securely before attaching to your phone case.
Size Customization Tips
- Shorter Keyring Charm: Reduce the Foundation Chain for the Wrist Strap Cord from Ch 65 down to Ch 30 (29 sl st).
- Longer Crossbody Strap: Chain 220 stitches for a long strap cord (219 sl st) and double the number of accent beads.
- Larger Heart Motif: To scale up the heart charm size, add an extra increase round to each lobe:
Rnd 3: (2 sc, inc) x 3 (12 sc), join for24 scon the body, and work proportional decreases.
Care Instructions
- Cleaning: Spot clean gently with a damp cloth and mild liquid soap. Do not submerge the natural wooden beads in water for extended periods to prevent cracking.
- Drying: Lay flat on a clean dry towel away from direct sunlight.
FAQ
Can I attach this strap to any phone case?
Yes! Most modern phone cases feature dedicated lanyard anchor holes on the side or bottom corner. Simply slip the thin top nylon loop through the hole, feed the entire charm through the loop, and pull taut.
How do I stop the wooden beads from sliding on the cord?
Working your strap cord in single crochet or slip stitches creates enough thickness to keep the wooden beads sitting snugly in place. If your bead holes are oversized, place small yarn knots on either side of the bead.
What yarn works best for thread-style charms?
If you prefer a refined finish, size 10 mercerized crochet cotton worked with a 1.5 mm hook produces crisp, durable mini charms.
Happy Crocheting!
You have completed your handmade Beaded Crochet Phone Charm Strap! Pin this pattern to your favorite Pinterest crochet boards, share it with your crafting friends, and experiment with pastel shades to match your phone cases and daily bags!
📄 Your free PDF pattern