Skip to content
Hook & Hearth

Patterns

Hook & Hearth

Reader Favorites

Patterns Ideas

Ribbed Crochet Lampshade Cover Free Crochet Pattern

Love it? Share it with a friend
Ribbed Crochet Lampshade Cover Free Crochet Pattern

Soft light filtered through tactile cream ribbing brings an instant sense of warmth and sanctuary to any room. This elegant cover is worked sideways using simple back-loop single crochet to create clean, vertical ridges that slip snugly over a standard drum shade, finished with a delicate scalloped trim along the lower hem.

Ribbed Crochet Lampshade Cover Free Crochet Pattern

Quick Facts

  • Skill level: Easy / Advanced Beginner
  • Finished size: Sized to fit standard 10 in (25 cm) diameter drum shades (28 in / 71 cm unstretched circumference, 10.5 in / 26.5 cm total height)
  • Yarn: Medium / Worsted Weight (Category 4) in Cream (approx. 240 yds / 220 m)
  • Hook: 5.0 mm (US H-8) crochet hook
  • Stitches used: Chain (ch), Single Crochet (sc), Single Crochet Back Loop Only (sc BLO), Double Crochet (dc), Slip Stitch (sl st)
  • Time to make: 3 to 4 hours

Note: Complete size customization instructions for non-standard lampshades are provided near the end of this pattern.

What Makes This Lampshade Cover Special

  • Vertical Ribbed Texture: Working in turned rows of back-loop single crochet creates high-contrast vertical ridges that mimic woven architectural lampshades while softly diffusing light.
  • Tailored Stretch Fit: Sized with slight negative ease so the cover hugs your existing shade smoothly without slipping or sagging.
  • Scalloped Hemline: A graceful 5-dc shell border adds a vintage touch along the bottom edge, catching the warm glow from the lamp base.
  • Seamless Appearance: Seamed cleanly along one back rib repeat for a smooth 360-degree finish.

Skill Level

This project is suitable for an adventurous beginner or intermediate crocheter. Required skills include:

  • Working stitches into foundation chains
  • Working in the back loop only (BLO)
  • Working sideways turned rows
  • Joining ends with slip stitches to form a seamless cylinder
  • Working a decorative scalloped border along row ends

If you can single crochet and turn your work, you can easily complete this cozy lampshade cover in a single afternoon.

Finished Measurements

Measurement Inches Centimeters
Height (Body only) 9.5 in 24 cm
Height (Including Scallop Hem) 10.5 in 26.5 cm
Unstretched Circumference 28 in 71 cm
Stretched Circumference (Target Fit) 30–31 in 76–79 cm

Materials You Will Need

Color Yarn Weight / Type Yardage Meters
Cream Medium / Worsted (Category 4), 100% Cotton or Acrylic 240 yds 220 m

Notions & Tools:
– Crochet Hook: 5.0 mm (US H-8) or size needed to obtain gauge
– Tapestry Needle: Large-eye yarn needle for weaving in ends
– Measuring Tape: Soft tape measure to check shade dimensions
– Stitch Markers: 2 removable stitch markers (optional, for tracking row ends)
– Drum Lampshade: Standard 10 in (25 cm) diameter drum shade (approx. 30 in / 76 cm around x 9.5 in / 24 cm high)

Yarn Suggestions

Yarn Brand & Line Fiber Content Skein Details Designer Notes
Lion Brand 24/7 Cotton 100% Mercerized Cotton 186 yds (170 m) / 3.5 oz (100g) Excellent stitch definition, heat-resistant natural cotton fiber, minimal stretch distortion.
Paintbox Yarns Simply Aran 100% Acrylic 201 yds (184 m) / 3.5 oz (100g) Soft, warm ivory glow, economical choice with generous yield.
Caron Simply Soft 100% Acrylic 315 yds (288 m) / 6 oz (170g) Slight sheen, drapes smoothly over drum shades.

⚠️ Note: Safety standard: Textile lampshade covers must only be installed over modern LED bulbs, which emit negligible heat. Never install handmade covers over traditional incandescent bulbs or halogen lighting.

Gauge

Stitch Pattern Gauge (4 in / 10 cm)
Single Crochet Back Loop Only (sc BLO) 16 stitches x 16 rows = 4 in x 4 in (10 cm x 10 cm)

Abbreviations

Abbreviation Full Term (US)
ch Chain
sc Single Crochet
sc BLO Single Crochet Back Loop Only
dc Double Crochet
sl st Slip Stitch
st / sts Stitch / Stitches
sk Skip
rnd / rnds Round / Rounds
rep Repeat

UK conversion: sc = dc, hdc = htr, dc = tr.

Special Stitches Explained

Single Crochet Back Loop Only (sc BLO)

Insert your hook under only the back loop (the loop furthest away from you) of the designated stitch. Yarn over, pull up a loop (2 loops on hook), yarn over, and pull through both loops. This creates a raised horizontal ridge on the front surface.

5-Double-Crochet Shell (5-dc Shell)

Work 5 double crochet stitches into the exact same stitch or row-end. This forms a fan-shaped scallop along the border.


Pattern Instructions

Main Ribbed Body (Cream, make 1)

The main cover is worked flat in turned rows from side to side. The vertical ribs run top-to-bottom around the lampshade.

  • Foundation: Ch 39 in Cream.
  • Row 1: Sc in 2nd ch from hook and in each ch across (38 sc). Turn.
  • Row 2: Ch 1 (does not count as st here and throughout), sc BLO in each of the 38 sts across (38 sc). Turn.
  • Rows 3–112: Ch 1, sc BLO in each st across (38 sc). Turn.

✅ Checkpoint: Measure your rectangle flat without stretching. It should measure approximately 9.5 in (24 cm) wide by 28 in (71 cm) long across 112 rows (56 ridges).

  Top Edge (112 row-ends)
┌──────────────────────────────────────┐
│ |||||||||||||||||||||||||||||||||||| │  Main Body (sc BLO sideways)
│ |||||||||||||||||||||||||||||||||||| │  9.5 in (24 cm) high
└──────────────────────────────────────┘
  Bottom Edge (112 row-ends -> Scallop Shells)

Seaming the Cylinder

  1. Fold the ribbed panel in half so Row 112 matches the foundation chain edge with right sides together.
  2. Seam Row: Ch 1, working through the BLO of Row 112 and the matching foundation chain loop, sl st across all 38 sts to form a continuous ribbed cylinder (38 sl st). Fasten off or leave yarn attached to begin the bottom border.

💡 Designer Tip: Keep your slip stitches moderately loose during seaming so the seam stretches at the same rate as the rest of the ribbed fabric.


Scalloped Bottom Border (Cream)

Turn the cylinder so you are working into the raw bottom row-ends along the lower edge of the cover.

  • Rnd 1: Join Cream yarn with a sl st at the bottom seam. Ch 1, work 1 sc into each row-end evenly around the bottom edge, join with a sl st to the first sc (112 sc).
  • Rnd 2 (Scallop Hem): Ch 1, [sc in next st, sk 1 st, work 5 dc into next st, sk 1 st] 28 times, join with a sl st to the initial sc (28 shells, 28 sc / 168 sts total). Fasten off.

✅ Checkpoint: Count your scallops. You should have 28 uniform fan shells running along the bottom circumference, aligning neatly with every two rib ridges.


Top Edge Neatening Border (Cream)

Working into the raw top row-ends along the upper rim of the lampshade cover.

  • Rnd 1: Join Cream yarn at the top seam with a sl st. Ch 1, work 1 sc into each row-end around, join with a sl st to first sc (112 sc).
  • Rnd 2: Ch 1, sl st into each st around to create a neat, reinforced rim that grips the top wire frame of your drum shade (112 sl st). Fasten off.

Assembly

  1. Check Seam: Ensure all joins along the vertical back seam are smooth and secure.
  2. Fitting: Slip the crochet cover over your plain drum lampshade from top to bottom. Pull the top neatened edge flush over the top metal wire frame, letting the scalloped trim extend past the bottom edge of the shade frame.

Finishing

  1. Using a tapestry needle, weave in all yarn tails securely on the inside of the cover.
  2. Gently steam block or lightly mist with water while fitted over the shade to flatten any wavy edges and set the ribs straight.

Size Customization Tips

  • Adjusting Height:
  • Standard formula: Chain your desired shade height measurement in inches x 4 sts + 1 ch.
  • To add height: Add 4 chains for every 1 in (2.5 cm) of added shade height.
  • Adjusting Circumference:
  • Standard formula: Measure your drum shade circumference, subtract 2 in (5 cm) for stretch fit.
  • Gauge check: 4 rows = 1 in (2.5 cm) of circumference (or 1 scallop repeat).
  • Always end on a multiple of 4 rows so your bottom scallop pattern fits evenly around without remainder sts!

Care Instructions

  • Cleaning: Spot clean with a damp cloth and mild liquid soap. If deep cleaning is required, hand wash gently in cold water, squeeze gently without wringing, and reshape flat over your drum shade to dry naturally.
  • Storage: Keep away from damp environments. Ensure bulb rating remains 100% LED.

FAQ

Can I use acrylic yarn instead of cotton for a crochet lampshade cover?

Yes! Quality acrylic yarns like Caron Simply Soft or Paintbox Yarns Simply Aran work wonderfully. However, make sure your light fixture strictly uses cool-operating LED bulbs.

How do I stop the cover from slipping down the drum shade?

The top edging round of slip stitches naturally cinches slightly over the top wire rim. If your shade is slick, you can weave a thin elastic thread into the top row of slip stitches for extra grip.

Can I adapt this pattern for a tapered (conical) lampshade?

Because this pattern is worked in straight sideways rows, it fits cylindrical drum shades best. For a tapered shade, you would need to introduce short-row shaping along the top edge to narrow the top circumference.


Happy Crocheting!

Enjoy the warm, cozy atmosphere your new ribbed crochet lampshade cover brings to your home! Save this pattern to your favorite Pinterest crochet board, and leave a comment sharing your finished project colors.


Like this one? Save it for later.

100% free

Get this pattern as a free PDF

+ A new free pattern every day straight to your inbox Daily

Email needed to download · No spam · Unsubscribe anytime · Privacy

Creating your PDF…

This takes a few seconds.

Your PDF is downloading!

Check your downloads, or print it right now. Your daily free patterns start arriving in your inbox.

Your free PDF is unlocked! 🎉

👇 Keep reading — your Download PDF button is waiting for you further down the pattern.