Mini Disco Ball Crochet Bag Charm Free Party Pattern

New Year’s Eve deserves a bag charm that sparkles a bit. This tiny ball is worked in silver metallic thread with sequins caught into the stitches as you go, then stuffed lightly so it keeps a round shape. A gold clasp clips it to a clutch, a zip, or a set of keys. It is ready well before the countdown.

Mini Disco Ball Crochet Bag Charm Free Party Pattern

Quick Facts

• Skill level: Intermediate
• Finished size: 2 inches (5 cm) in diameter
• Yarn: Silver metallic fingering-weight thread
• Hook: 1.75 mm steel crochet hook
• Stitches used: ch, sc, inc, dec
• Time to make: 2 hours

Size tips and customization options are included further down the page.

What Makes This Crochet Bag Charm Special

Capturing the look of a vintage disco ball requires a clever combination of materials and tension. By working with a fine silver metallic thread, the stitches create a tight, uniform grid that resembles mirrored tiles. As you progress through the rounds, flat silver sequins are folded right into the sc stitches so they catch the light from every angle. A lightweight amigurumi filling holds the 3D sphere perfectly round without distorting the shape, while a sturdy gold lobster claw clasp and linked chain hardware attach securely to any handbag.

Skill Level

• Working in continuous spiral rounds without joining
• Managing tension while catching flat sequins into stitches
• Basic amigurumi increases and invisible decreases
• Attaching metal hardware findings

Don’t worry if you haven’t worked with sequins before—the technique is simple once you establish a rhythm.

Finished Measurements

• Diameter: 2 inches (5 cm)
• Circumference: 6.3 inches (16 cm)
• Hardware Length: 2 inches (5 cm) including clasp and chain

Materials You Will Need

Material	Description	Quantity / Details
Yarn (A)	Silver metallic crochet thread (size 10 equivalent)	20 yards (18 meters)
Sequins	Flat silver cupped sequins (approx. 5mm diameter)	Approx. 45-50 sequins pre-strung or fed onto the thread
Hook	Steel crochet hook size 1.75 mm (US Steel 4)	1 hook
Hardware	Gold lobster claw clasp with short attached chain	1 set (approx. 2 inches / 5 cm long)
Notions	Polyester fiberfill stuffing	Small pinch
Notions	Yarn needle for weaving ends	1 needle
Notions	Stitch marker	1 marker

Yarn Suggestions

Yarn Line	Weight	Skein Yardage	Notes
DMC Diamant Metallic Thread	Fingering / Size 10	38 yards (35 meters) per spool	Excellent metallic sheen, smooth glide
Aunt Lydia’s Metallic Crochet Cotton	Size 10	100 yards (91 meters) per ball	Sturdy, holds shape well for amigurumi

⚠️ Note: Avoid fuzzy or brushed novelty yarns, as they will obscure the metallic shine and hide the sequins completely.

Gauge

• Rnds 1 to 4 of the disco ball = 1.25 inches (3.2 cm) across using a 1.75 mm hook.
• Exact gauge is not critical for this project, but work with a firm tension so the stuffing does not show through the stitches.

Abbreviations

• beg = beginning
• ch = chain
• dec = invisible decrease (insert hook in front loops of next 2 sts, yo, pull through both, yo, pull through 2 loops)
• inc = increase (work 2 sc in the same stitch)
• rep = repeat
• rnd(s) = round(s)
• sc = single crochet
• sl st = slip stitch
• st(s) = stitch(es)
• yo = yarn over
• (…) = work instructions within parentheses as many times as directed

UK Terms Translation: sc = dc, hdc = htr, dc = tr.

Special Stitches Explained

1. Magic Ring: Form a loop with the working end of the thread crossing behind the working yarn. Insert hook into the center of the loop, yo, pull up a loop, ch 1, and work the first round of sc directly into the ring. Pull the tail to close tightly.
2. Invisible Decrease (dec): Insert hook into the front loop only of the first stitch, then insert hook into the front loop only of the second stitch. Yo and pull through both front loops (2 loops on hook). Yo and pull through remaining 2 loops.
3. Sequin Placement: Before starting, slide 50 sequins onto your silver metallic thread. When working an sc, push one sequin right up against the working loop on your hook, then complete the sc stitch so the sequin is trapped flat against the outside of the fabric.

Pattern Instructions

Pattern Notes: The disco ball is worked in continuous spiral rounds without joining. Do not slip stitch at the end of rounds unless specified. Use a stitch marker to track the first stitch of each round. Pre-string approximately 50 flat sequins onto your silver metallic thread before beginning.

Section 1: Disco Ball (Silver, Make 1)

Rnd 1: Leaving a 6-inch starting tail, start with a Magic Ring, work 6 sc into the ring. Place a stitch marker in the first st. (6 sc)

Rnd 2: (Inc in next st with 1 sequin) x 6. (12 sc)

Rnd 3: (1 sc, inc in next st with 1 sequin) x 6. (18 sc)

Rnd 4: (2 sc, inc in next st with 1 sequin) x 6. (24 sc)

Rnds 5 to 7: Sc in each st around, catching 1 sequin into every 3rd st. (24 sc)

Rnd 8: (2 sc, dec with 1 sequin) x 6. (18 sc)

✅ Checkpoint: Stop here and firmly stuff the ball with polyester fiberfill to ensure a smooth, round 3D shape before closing the opening.

Rnd 9: (1 sc, dec with 1 sequin) x 6. (12 sc)

Rnd 10: Dec x 6. (6 sc)

Fasten off, leaving an 8-inch tail. Thread the tail through a yarn needle, weave through the front loops of the remaining 6 stitches, and pull tightly to close the top completely. Secure and hide the tail inside the ball.

Section 2: Hardware Attachment

Take the gold lobster claw clasp with its attached chain. Using a length of silver metallic thread, securely stitch the end of the chain to the top closed center of the disco ball (Rnd 10 closure point) with 4-5 tight anchoring wraps. Weave in all remaining ends securely. Clip the lobster clasp onto the top hanging loop.

Assembly

No complex assembly is required as the hardware is attached directly to the top of the crocheted sphere during finishing.

Finishing

Inspect the disco ball to ensure all sequins lie flat and face outward. Trim any stray thread ends and verify that the lobster clasp moves freely.

Size Customization Tips

• To make a slightly larger disco ball for statement bags, continue the increase sequence to Rnd 5: (3 sc, inc) x 6 (30 sc), work 3 straight rounds, then decrease symmetrically. Add 10-12 more sequins to your thread before starting.
• To make a miniature charm for delicate zipper pulls, stop increases at Rnd 3 (18 sc), work 2 straight rounds, and decrease back down to 6.

Care Instructions

Spot clean gently with a damp cloth and mild soap if needed. Do not submerge in water or place in a washing machine, as the metallic thread and metal hardware require gentle handling. Store away from sharp objects that might scratch the sequins.

FAQ

Can I use regular cotton yarn instead of metallic thread?

You can use a size 10 cotton crochet thread in silver, but it will have a matte finish rather than the high-shine disco look shown in the photos. Metallic thread gives the most authentic mirror-ball reflection.

How do I keep the sequins from twisting while I crochet?

Slide a batch of sequins onto your thread before you begin, and simply push one up against your working stitch just before yonal-over to complete the sc. If a sequin twists sideways, gently nudge it flat with your fingernail before pulling the stitch tight.

Is this bag charm safe for children’s backpacks?

While the project is easy to make, the small sequins and metal hardware pose a choking hazard for young children. This charm is best suited for teen or adult accessories, handbags, and adult keychains.

Happy Crocheting!

I hope you love making your Mini Disco Ball Bag Charm! Be sure to save this pin on Pinterest so you can find it easily when party season arrives, and leave a comment below sharing what color handbag you plan to clip yours onto.